This curtain rolls up from the centre causing no stress points on the curtain and remains flat and free of creases. It rises to within 381 mm (15") to the underside of the support and is suitable where low overhead exists. The dual independent lower sections eliminate impact from one side of the curtain to the other and have increased sound deadening qualities. This curtain design is not available with 1 1/4" sport netting in the upper half of the curtain.
Electrical requirement: 3-phase, 6 Amp at the end of the curtain near the key switch.
The Isolator Acoustic Roll Up Divider Curtain having a single upper panel and two (2) lower panels. The lower panels are not interconnected and are separated by 140 mm (5 ") spacing, terminating in pockets to accommodate 32 mm (1 ") ballast pipes that rest on the floor. This prevents contact from impacts from one side of the curtain to the other. This curtain has superior sound deadening than a single wall curtain regardless of weight. Curtain can be supplied with a flexmesh top section that may be required for light and heat considerations.
The system includes a 2hp, 3-phase tubular motor installed in one end of a custom anodized 140 mm (5 1/2") aluminum extrusion at half curtain height. Motor is thermally protected and contains an electric brake, planetary gear system and limit switches. Motor control is by electric contactors operated by a spring-loaded key switch. When energized, the motor and center aluminum extrusion rotates, this results in the tube winding up the lower portion of the curtain as it rolls itself up the upper portion of the curtain. The torque reaction of the motor is transmitted via a car system that is contained in a track mechanism mounted to the wall in line with the curtain from half height up to the overhead. |
